Samsung SHR-2040P/GAR, SHR-2042P, SHR-2040PX, SHR-2040P/XEC manual Sequence Time

SHR-2040/2041/2042 USER’S MANUAL

●Sequence Time

-When connecting with SHR-2040/2041/2042 in the monitoring mode, set the auto sequence time if the auto sequence is set. The time can be set from 10 to 20 minutes.

●OSD Display

-Sets if OSD shall be displayed on each channel of Smart Viewer.

-Whether you check “Enable” or not, OSD will appear or not.

However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by the OSD condition.

●Callback Connection

-Sets the port for Callback connection.

●Auto Connection

-Sets if the smart viewer is automatically connected to SHR-2040/2041/2042 or site at the initial operation.

-If you check “Auto Connection On”, the names of SHR-2040/2041/2042 and Site currently registered at the DVR/Site list will be displayed in the following list.

If you select one from the list, the smart viewer will connect to the selected SHR-2040/2041/2042 or Site when it operates later.

●Language

- Sets the language used in the SmartViewer.

9-47