Samsung SHR-2040P/GAR, SHR-2042P manual Motion Detection Setup, Motion Detection Mode, Area

SHR-2040/2041/2042 USER’S MANUAL

Motion Detection Setup

●Motion Detection Mode

Off : Motion Detection does not operate

On : Motion Detection operates.

●Area

Selects the Motion Detection area. It is composed of 45x40(NTSC)/45x48(PAL) sized Block. It is impossible to set 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors.

Select All : Selects the whole area.

Select Block : Selects a block every time. Selection is done by a toggle system.

Select Quarter : Splits the whole area into 4 pieces, which enables selecting a fourth of the whole area.

Clear All : Cancels the whole area.

Save & Exit : Saves and exits.

Exit : Exits without saving.

5-23