Samsung SHR-2042P, SHR-2040P manual The some functions of PTZ camera are used under restriction

●Other PTZ Camera Control Modes perform its control in a single screen. Press the channel selection button in the left front to select the PTZ setting channel and press the PTZ button. If you succeed in entering Single Screen PTZ Camera Control Mode, the PTZ symbol on the screen will turn yellow from white while the PTZ button will turn blue. Single Screen PTZ Camera Control Mode supports Pan, Tilt, and Zoom operation basically and Preset, Camera Menu, and other functions additionally.

[SHR-2040]

[SHR-2041]

[SHR-2042]

●Press the PTZ button in Live Mode to cancel PTZ Camera Control Mode. After cancellation, the PTZ symbol on the screen will turn white from yellow while the PTZ button will lose its blue light.

Note

If you select Remote Control Device, you may not control PTZ Camera with SHR-2040/2041/2042. It’s because the PTZ button in front of SHR-2040/2041/2042 remains inactivated.

Press the PTZ button and the PTZ ban icon( ) will appear. It’s because the RS-485 port setup was done for Remote Control Device.

The some functions of PTZ camera are used under restriction.

Note

When using the remote controller (SCC2000), direct camera control is available only for Samsung Protocol in the remote controller (refer to the SCC2000 user manual). If there is no PTZ control within the maximum 5 minutes in DVR, the PTZ mode is cancelled automatically. It is for PTZ control in the remote viewer while not controlling PTZ.

6-2