Manuals / Samsung / Home Audio / Soundbar/SoundTower

Samsung SHR-2040P/GAR manual SHR-2040 1 at Primary Slot and 1 at Secondary Slot respectively

Models: SHR-2040P

1 178

Download 178 pages 37.62 Kb

Page 25

-SHR-2040 : 1 at Primary Slot and 1 at Secondary Slot respectively

SHR-2040/2041/2042 USER’S MANUAL

8.Check the connector, wiring, and cable fixing condition inside the product and close the cover.

9.Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side) ✻ You can apply 2 HDDs to each BRACKET-HDD as shown in the figure.

Caution

For HDD addition, please select the same HDD with the existing HDD fixed to the product as far as possible.

-SHR-2040 : 1 at Primary Slot and 1 at Secondary Slot respectively

-SHR-2041 : 2 at Primary Slot and 2 at Secondary Slot respectively

-SHR-2042 : 2 at Primary Slot and 1 at Secondary Slot(The internal CD-RW is connected to the secondary master.) respectively

Both HDDs attached to Primary Slot and Secondary Slot should be set to Master and Slave respectively. Refer to User’s Manual for Master or Slave Jumper Setting.

In the event of only one HDD installation, it shall be inserted into the Primary slot.

Note

Refer to Appendix 2 to see which HDD specifications are supplied.

2-9

Image 25

Samsung SHR-2040P/GAR, SHR-2042P, SHR-2040PX manual SHR-2040 1 at Primary Slot and 1 at Secondary Slot respectively

Contents

SHR-2040/2041/2042 User’s Manual Real Time DVRSafety Regulations Operation warranty temperature Before we startStandards Approvals System ShutdownChapter 2 Installation Safety Regulations Before we start Standards ApprovalsChapter 3 Connecting with Other device Chapter 1 Overview6 Chapter 6 PTZ Camera Control 5 Chapter 5 Menu Setup7 Chapter 7 Recording 8 Chapter 8 Search and PlayAppendix Chapter 9 Smart ViewerChapter 1 Overview SHR-2040/2041/2042 USER’S MANUAL 1Introduction2Features Display 3Part Names and FunctionsMode SearchName ReverseFunction Mode DisplayName FunctionFast / Step SearchName FunctionName ALARMFunction VIDEO INName ALARMFunction VIDEO INChapter Installation 1Installation Environment Setup Only 2Checking Product & AccessoryHDD Addition Procedure 3HDD AdditionCaution for HDD Addition SHR-2041 SHR-2042 SHR-2040 SHR-2041/2042 SHR-2040/2041/2042 USER’S MANUALthe screw of the bracket to which you want to fix HDD BRACKET-HDDSHR-2040/2041/2042 USER’S MANUAL 6. Reattach HDD to the original position of BRACKET-HDD SHR-2040 1 at Primary Slot and 1 at Secondary Slot respectively @ Fix the fan as follows 2-11 SHR-2040/2041/2042 USER’S MANUAL2-12 $ The cable should be out from the left holeChapter 3 Connecting with other device SHR-2040/2041/2042 USER’S MANUAL 1Connecting the Video, Audio, and MonitorSHR-2040 SHR-2041/2042 Connecting to Internet through Ethernet10/100BaseT 2Connecting the NetworkConnecting to Internet through ADSL SHR-2040/2041/2042 USER’S MANUALConnecting to Internet through ADSL Connecting to Internet through Ethernet10/100BaseTSHR-2041/2042 SHR-2041/20423Connecting the USB Name 4Connecting the Alarm Input/OutputFunction SHR-2040/2041/2042 USER’S MANUAL ALARM IN/OUT Connection5Connecting the RS-485 Device Chapter Live 1System Operation Definition of Live Screen Icon 2Live screen Mode4 Split Mode Definition of Live Screen ModePIPPicture In Picture Mode Auto sequence ModeSelecting Live Screen Mode Audio On/Off Setup in the Full Screen 3Live Channel Selection and Audio On/Off SetupAudio On/Off Setup in the 4 Split Mode Channel Selection and Audio On/Off Setup in the PIP ModeFreeze Function 4Freeze and ZoomZoom Function 5Event Monitoring 6Spot-out monitoring Chapter Menu Setup Before Use 1System Date/Time/Language SetupDate Format Password System Log Load Factory DefaultSystem Log List Event LogFirst Returns to the first Log page Prev Back to the previous Log pageUSB S/W Upgrade System Information and SetupDevice Erase External HDD Setup HDD SetupDevice Erase Data will not be deleted in the backup mode USB S/W UpgradeHDD End Mode HDD Mode SetupHDD End Beep Device Remote control DeviceBaudrate ParityRemote Control Device System ShutdownSystem Shutdown SHR-2040/2041/2042 USER’S MANUAL2Camera Camera ConfigTitle You can name the camera of selected channel The above items shall be same to the PTZ device setup PTZ DeviceScreen Setup Event Monitoring 3MonitoringOSG Display Spot Out Channel1 CH Support MonitorRecord Mode 4Recording ModeRecord Video size Mode Event Record Mode setup 5Event Record ModePAL 720x288N NormalQuality will be determined Alarm Detection Setup Motion Detection Mode Motion Detection SetupArea Video Loss Detection Setup 6Record Schedule Holiday Schedule / Event RecordBackup 7Backup8Network IP SetupGateway PasswordSubnet Mask ADSL User IDTransfer Protocol Settings On/Off Off is default but you may choose On Callback SettingsRetrial You may choose one from 1 to 20 and the number changes by Port Setup for SmartViewer Connection 9Network SetupIn the event of TCP Setup from Transfer Protocol Setup Page In the event of UDP Setup from Transfer Protocol Setup PageChapter PTZ Camera Control TELE WIDE VIEW PRESET 1PTZ Camera Control ModeThe some functions of PTZ camera are used under restriction TELE WIDE VIEW PRESET TELE WIDE VIEW PRESETWIDE VIEW PRESET 2Basic Operation of PAN, TILT, & ZOOMFor AD Protocol PTZ Camera, this memorizes only 7 Presets 3Preset SetupTELE WIDE VIEW PRESET Move the cursor to right and press ENTER in PTZ Control Mode first. Then, press the “Enter” to run P/T/Z/ operation mode in the PIP screen and press the “Enter” again to cancel P/T/Z/ Motion Mode WIDE VIEW PRESET 4Camera Menu SetupTELE TELE WIDE VIEW PRESET 5Preset ViewTELE WIDE VIEW PRESET 6Other ViewFor example, Samsung Protocol Chapter 7 Recording 1REC Normal Recording Schedule/Event recording is selected in the Schedule Recording 2Schedule RecordingAlarm Detection 3Event RecordingEvent Recording Mode Motion DetectionChapter Search and Play Event Search searches a video file recorded by the occurrence of event Before Use1Calendar Search 2Event Search 3Date/Time Search 4Go to First Search 5Go to Last Search First, select the backup device Mark the data of device 6BackupThe Previous button shows the previous page The Next button shows the next pageMENU. Be sure to exit from the MENU to start the playback 7PlaybackDefinition Play Screen Mode Play at Faster Speed Chapter Smart Viewer SHR-2040/2041/2042 USER’S MANUAL 1Introduction2Feature OS Win98SE, WinMe, Win2000, WinXP 3PC SpecificationRecommendationRecommendation CPU Pentium 3, 1GHz or higher RAM 256 MB or higher VGA RAM 32Mb or higher DirectX 8.1 or higherSmart Viewer Installation 4Smart Viewer InstallationClick the “Next” button Designate a folder to install Smart Viewer in it and click “Next”If you agree with Smart Viewer License, click “Yes” SHR-2040/2041/2042 USER’S MANUALThe system proceeds with setup file installation and system setup SHR-2040/2041/2042 USER’S MANUAL 5Smart Viewer Program Execution6Smart Viewer Initial Screen Connection Failure Cases 7Monitoring ModeYou should terminate the Smart Viewer first to change them Time Information # Clicking the speaker icon turns the audio of channel on or off Event Message Connecting.. Trying to connect to SHR-2040/2041/2042 Displays the connection condition of DVR and CAMERA in the list Camera connection Indication WindowIn Single Mode DVR13CH ... DVR14CH DVR21CH ... DVR11CH Camera Off When monitoring with Quad Mode When monitoring with Single ModeIn Single Mode DVR13CH ... DVR14CH DVR21CH ... DVR11CH The FAVORITE button is available only when you contact SITE Video Recording Button The PAN / TILT / ZOOM function is supported to all the cameras But, the AD Protocol camera can be set up to 7 PRESET items Self Menu Setup of PTZ device When connecting as a user, you are denied to access the search mode 8Search ModeDVRSHR-2040/2041/2042 Selection/Change by contacting SITE Page @ Backup Button $ Print Time Line Next Button @ It shows what the selected Setup item can set up in detail 9Setup Mode# button to terminate the setup window Initial ScreenSetup Item Selection Button DVR Setup For the detailed items of DVR Setup, refer to Chapter Detailed DVR Setup Items System InformationPassword Information shows the information on on-line SHR-2040/2041/2042System Password shall be composed of numeric only, up to 8 digits Language specification to be supported is subject to change later 9-36 Remocon Remote Control Device@ Camera Config PTZ device It sets both the event monitoring and OSG display of the live mode# Monitoring Monitoring 9-38$ Recording Rec. Mode 9-40 Event RecNTSC PAL More than one camera should be selected to apply the alarm Alarm Rec It sets the information necessary for the alarm recordingMotion Rec SHR-2040/2041/2042 USER’S MANUALVideo Loss Network PasswordIP Settings Callback You can set the Callback function of SHR-2040/2041/2042 Viewer Setup Video Recording ! Naming Sequence Time Site Setup DVR List To add a new DVRSHR-2040/2041/2042 To add a new DVR, input all the information required The viewer can monitor up to 4CH all the same time # To Edit the old DVRSHR-2040/2041/2042 Site List @ To delete an old site or DVRSHR-2040/2041/2042 To add a DVRSHR-2040/2041/2042 to the site S/W Version Smart Viewer Version The S/W upgrade requires about 5 minutes Appendix Details 1Product SpecificationRemarks Max Image Rate ResolutionPAL 1ips/2.5ips/5ips/6.25ips/8.33ips/12.5ips/25ips RS-485 PTZ Device Control, Remote Control Device BackupRemarks Video size6Y120LO 2The specification of HDD and peripheral device6Y160LO WesternSHR-2040 SHR-2041 3Outline DrawingsSHR-2040/2041/2042 USER’S MANUAL 10-510-6 SHR-2042Use System / Load Factory Default in MENU or 4Factory DefaultMotion Detection Setup 5SHR-2040/2041/2042 Smart Viewer Frame Specification for the Playback The play frame specification of Smart Viewer varies on the setup of SHR-2040/2041/2042 Recording Rate and Video Size or the screen split mode of Smart Viewer. The above specification is applicable only when the main body of SHR-2040/2041/2042 is connected with a fast network like LAN. When the main body of SHR-2040/2041/2042 is connected with a slow network like ADSL, the play speed will be 0.5 Frame/sec. In addition, the above specification has been defined to the recommended specification of your PC. If your PC specification is lower than the recommended, the number of frame to played may diminish 6TroubleshootingFAQ 7. The channel button does not operate in Live 13. Smart Viewer in operation is disconnected Correct Disposal of This Product AB68-00517BWaste Electrical & Electronic Equipment