SHR-2040/2041/2042 USER’S MANUAL

1System Operation

●Turn the power on and the following LOGO pops up on the screen.

●After the LOGO appears, all of LED in the front flickers 6 times to initialize the system for operation.

●Upon completion of normal initialization, the Live screen appears accompanying a beep sound.

●It requires 30 to 40 seconds until the Live screen appears.

Note

If a new HDD is installed, it may require more time to be appeared the Live screen due to the initialization time of a new HDD.

If the Live screen does not appear continuously or the LED in front repeats flickering, please check the connection between inside and outside. If the system does not operate in normal, contact with the shop where you bought the product.

●The Live screen does not affect the earlier MENU setup. If you reboot the system after power-off during recording, the Live screen will appear, accompanying recording.

Note

If the Live screen dose not appear, check if the Video Out comes out in Composite mode or VGA mode.

4-1

Page 38 Page 40
Page 39
Image 39
Samsung SHR-2040P/XEC, SHR-2040P/GAR, SHR-2042P, SHR-2040PX manual 1System Operation
Page 38 Page 40
Top Page Image Contents