EXTERNAL CONTROL | NEC LCD Monitor | ||
|
|
| Rev.3.5 |
INDEX |
|
|
|
I. Application | 3 | ||
II. Preparation | 4 | ||
2. Connectors and wiring | 4 | ||
2.1 | 4 | ||
2.2 | LAN control | 4 | |
III. Communication specification | 5 | ||
3. Communication Parameter | 5 | ||
3.1 | 5 | ||
3.2 | LAN control | 5 | |
3.3 | Communication timing | 5 | |
4. Communication Format | 6 | ||
4.1 | Header block format (fixed length) | 7 | |
4.2 | Message block format | 9 | |
4.3 | Check code | 11 | |
4.4 | Delimiter | 12 | |
5. Message type | 13 | ||
5.1 | Get current Parameter from a monitor | 13 | |
5.2 | "Get parameter" reply | 14 | |
5.3 | Set parameter | 15 | |
5.4 | "Set parameter" reply | 16 | |
5.5 | Commands | 17 | |
5.5.1 Save Current Settings | 17 | ||
5.5.2 Get Timing Report and Timing reply | 18 | ||
5.5.3 NULL Message | 19 | ||
IV. Control Commands | 20 | ||
6. Typical procedure example | 20 | ||
6.1. How to change the “Backlight” setting | 20 | ||
6.2. How to read the measurement value of the | ..................23 | ||
6.3. Operation Code (OP code) Table | 26 | ||
7. Power control procedure | 36 | ||
7.1 | Power status read | 36 | |
7.2 | Power control | 38 | |
8. Asset Data read and write | 40 | ||
8.1 | Asset Data Read Request and reply | 40 | |
8.2 | Asset Data write | 42 | |
(1/72)
