Silex technology SX-550 manual Server Information Commands, SET Port S1 Stop 1, SET Snmp Getcomm

Command

Description

	Sample output:
	SET PORT S1 SPEED <baudrate>
SET PORT S1	Sets serial port stop bits per character
STOP	The default value is 1.
	Sample output:
	SET PORT S1 STOP [1 2]

Server Information Commands

Table 41 Server Information Commands

Command	Description			Sample Output
SET SERVEr	Sets server description string
DEscription	Sample output:
	SET SERVEr	DEscription <description-string>
SET SERVEr NAme	Sets server node name
	The default value is TWC_xxxxxx, where xxxxxx are the last 6 hex digits of the
	MAC address.
	Sample output:
	SET SERVEr	NAme	<name>
SET SNMP GETCOMM	Gets community name
	The default value is public.
	Sample output:
	SET SNMP GETCOMM		<string>
SET SNMP JETADmin	Enables or disables JetAdmin compatibility
	The default value is enabled.
	Sample output:
	SET SNMP JETADmin [ ENable DIsable]
SET SNMP	Sets community 1 name
SETCOMM1	The default value is internal?
	Sample output:
	SET SNMP SETCOMM1 <string>
SET SNMP	Sets community 2 name
SETCOMM2	The default value is Pass.
	Sample output:
	SET SNMP SETCOMM2 <string>
SET SNMP CONtact	Sets system contact string
	The default value is null.
	Sample output:
	SET SNMP CONtact		<string>
Console Commands	silex			Page 63
	Part Number 40183-101