Silex technology SX-550 manual Command Description Sample Output, SET Snmp LOCation string

Command	Description		Sample Output
SET SNMP LOCation	Sets system location string
	The default value is null.
	Sample output:
	SET SNMP LOCation <string>
SH SERIAL	Displays serial number of the unit
	Sample output:
	Serial number is 9047595
SH SERVEr	Shows server parameters
	Sample output:
	Serial Server Serial # 9047595
	Address: 00-40-17-8A-0E-2B		Name: TWC_8A0E2B
	Number: 0
	Identification: Network Server
	Enabled Characteristics:
	Link DOWN
SH SERVEr CO	Shows server network statistics
	Sample output:
	Seconds Since Zeroed: 163	Frames Sent,1 Collision: 26
	Bytes Received:72950	Frames Sent, 2+Collision: 5
	Bytes Sent:18726	Send Failures: 0
	Frames Received:752	Send Failure Reasons: 0
	Frames Sent: 181	Receive Failures: 503
	Multicast Bytes Rcv'd:64474	Receive Failure Reasons: 1
	Multicast Bytes Sent: 2406	Unrecognized Destination: 0
	Multicast Frames Rcv'd:626	Data Overrun: 0
	Multicast Frames Sent:11	User Buffer Unavailable:0
	Frames Sent, Deferred:2014	System Buffer Unavailable:1
SH SNMP	Shows state of SNMP protocol enable
	Sample output:
	SNMP is Enabled
SH VErsion	Shows firmware version of print server
	Protocols supported: NetBIOS SNMP TCP/IP EMail DHCP
	Sample output:
	serial server
	Firmware Ver. 4.19 (2004.10.31)
	Boot Ver. 1.4
	16Mbit Flash
Page 64	silex		Console Commands
	Part Number 40183-101