Silex technology SX-550 manual Modify Basic Settings, Restoring Factory Default Settings

￿

Parameter

Description

Settings

Default Setting

Ecport

E-cable destination IP port number

9100 or set by user

9100

Restoring Factory Default Settings

The factory default settings can restored at any time. Simply perform a cold reset by pressing and holding the module push button for more than five seconds.

Modify Basic Settings

To establish communication between the SX-550 module and a serial device, the settings must be identical for both devices.

Changing Serial Settings

The serial settings, such as mode and baud rate or speed for both the SX-550 module and serial device must be identical in order to communicate. You can change the serial settings using ExtendView (recommended), the web browser interface, or the SX-550 module’s internal configuration console.

To change serial settings:

1.Using ExtendView, web browser interface or internal command console, click the Output Port tab. The Output Port window displays.

Figure 16 Output Port Tab

2. Click Serial Settings. The Serial Settings window displays.

Page 34	silex	Setting Configuration Parameters
	Part Number 40183-101