Silex technology SX-550 manual Set Ip Ftp, SET IP Http, Set Ip Lpd, Auto Bootp Rarp Dhcp Static

Command		Description
	The default value is 3.
	Sample output:
	SET IP BOot	n
SET IP ENable	Enables or disables all IP based protocols
	The value is Enable.
	Sample output:
	SET IP [ENable DIsable]
SET IP FTIme	Sets IP timeout
	If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in
	minutes.
	The default value is Disable.
	Sample output:
	SET IP FTIme	[ENable DIsable]
SET IP FTP	Enables or disables FTP protocol
	The default value is Enable.
	Sample output:
	SET IP FTP	[ENable DIsable]
SET IP HTTP	Enables or disables HTTP protocol
	The default value is Enable.
	Sample output:
	SET IP HTTP	[ENable DIsable]
SET IP KEepalive	Sets interval in minutes for sending TCP keepalive packets on a connection
	The default value is 5 minutes.
	Sample output:
	SET IP KEepalive n
SET IP LPD	Enables or disables the LPD protocol
	The default value is Enable.
	Sample output:
	SET IP LPD	[ENable DIsable]
SET IP MEthod	Sets method of getting IP address
	The default value is Auto.
	Sample output:
	SET IP MEthod	[ AUTO BOOTP RARP DHCP STATIC ]
SET IP PIng	Sends IP ping packets to test connection to remote host
	Sample output:
	SET IP PIng	aa.bb.cc.dd
SET IP PRObe	Enables or disables TCP connection probes
	The default value is Disable.
Console Commands		silex	Page 69
	Part Number 40183-101