Command |
|
|
| Description |
|
|
|
|
|
| |
| SET IP TImeout | n |
|
| |
SET IP WIndow | Sets TCP maximum window size in bytes |
| |||
| The default value is 10240. |
|
|
| |
| Sample output: |
|
|
|
|
| SET IP WIndow | nn |
|
| |
SH IP | Shows TCP/IP related parameters |
|
| ||
| The default value is |
|
|
| |
| Sample output: |
|
|
|
|
| IP is enabled |
|
|
|
|
| IP address | 192.0.0.192 | Boot tries | 3 | |
| Subnet mask | 0.0.0.0 |
| Boot method | AUTO |
| IP Gateway | 0.0.0.0 |
| Max window | 10240 |
| (set manually) |
|
|
| |
| LPD banner | disabled |
| Timeout | 1 min |
| LPD retries are disabled | Keepalive | 5 min | ||
Service | Port | TCP port |
xxxxxx_S1_A | S1 | 9100 |
xxxxxx_S1_B | S1 | 3001 |
Power Configuration Commands
Table 45 Power Configuration
Command |
| Description |
|
| |
SET POWER LEVEL n | Sets the power save mode. High power is for fastest throughput, | |
| low power is for lowest power consumption. | |
| Set POWER LEVEL 0, 1 or 2 | |
| 0 | = High Power |
| 1 | = Medium Power |
| 2 | = Low Power |
Firmware Update
Table 46 Firmware Update
Command
Description
SET LOAd ENable
Sets the firmware to perform a soft reset and enter the server boot program after the next Exit command.
Console Commands | silex | Page 71 |
| Part Number |
|
