Silex technology SX-550 manual Set Ip Tcp, SET IP Tftp

Command		Description
	Sample output:
	SET IP PRObe	[ENable DIsable]
SET IP RARp	Enables setting of default router and/or subnet mask based on RARP IP address
	set
	The default value is 0.
	Sample output:
	SET IP RARp	nn
	nn: 0=both 1=no subnet,		2=no router, 3=neither
SET IP REtry	Enables or disables LPD retry on incomplete job
	The default value is Disable.
	Sample output:
	SET IP REtry	[ENable DIsable]
SET IP ROuter	Sets default router address
	The default value is 0.0.0.0.
	Sample output:
	SET IP ROuter	aa.bb.cc.dd
SET IP SUbnet	Sets IP subnet mask
	The default value is 0.0.0.0.
	Sample output:
	SET IP SUbnet	aa.bb.cc.dd
SET IP TCP	Enables or disables the raw TCP 9100 protocol
	The default value is Enable.
	Sample output:
	SET IP TCP	[ENable DIsable]
SET IP TELnet	Enables or disables Telnet protocol
	The default value is Enable.
	Sample output:
	SET IP TELnet [ENable DIsable]
SET IP TFTP	Enables or disables TFTP protocol
	The default value is Enable.
	Sample output:
	SET IP TFTP	[ENable DIsable ]
SET IP TImeout	Sets TCP inactivity timeout.
	If fast timeout is enabled, the timeout is calculated as seconds.
	If fast timeout is disabled, the timeout is calculated as minutes.
	The default value is 1 minute.
	Sample output:
Page 70		silex	Console Commands
	Part Number 40183-101