Monessen Hearth KHLDV500 Features, Battery Installation, Command Center, Control Board, 73D0024

KHLDV Series Gas Fireplace SIGNATURE COMMAND SYSTEM OPERATION INSTRUCTIONS

FEATURES

Command Center

•Easy Access Function Operation and System Configura- tion

•Operation Confirmation/Fault Diagnostic Indications (LED/Buzzer)

•ON/OFF/HI/Med/Low Operation

•Optional Wall Mounting

Control Board

•Electronic Ignition

•Pilot Lockout safety feature

•Electric Power Regeneration from Thermopile to save battery

•6-hour Automatic Shut Down Option

•Convenient NG/LP Gas Type Conversion

•Standing Pilot/Intermittent pilot Conversion

•Previous settings Restoration Ability (Memory Off)

•Uninterrupted Operation During Power Outage (Auto- matic Battery Backup)

•ON/OFF RF Remote Receiver

•Optional Transmitter Learn Capability

AC Module Board (Requires TSFRSC Remote)

RF Receiver	To Thermopile
ON/OFF	To Sensor

To Sparker

NG/LP

Conversion

Control	To Command Center
Board	To Stepper Motor
OFF	To Valve
LED
ON
Master Switch
	AC Module

Command

Center

Battery Door

Figure 48 -

Signature Command System Components

•Easy Snap-on Design

•Embedded Compact 120 VAC Adapter with Auto Battery Back up Feature

•Remote Controlled 3-step Blower, Lighting, and On/Off Auxiliary AC Outputs

Transmitter (Optional)	TSFRSC
Three Flame Height Settings	X
Low battery Indication for Transmitter	X
Child Proof Lock-out	X
LCD Backlight	X
Security Codes 16	X
Countdown 6 hr Timer	X
Standard Thermostatic Control Mode	X
Smart Mode Thermostat (Auto Flame & Blower Modulation) X
Three Brightness Settings for Lights	X
Three Speed Control for Blower	X
On/Off AUX Rear Burner	X
Programmable Timer to turn blower on and off	X

BATTERY INSTALLATION

The Command Center uses four (4) "AA" batteries as back up for power outages. The system can operate for approxi- mately six (6) months on battery power.

To Install Batteries (not included):

1.Press down the battery door tabs and pull out to remove battery door.

2.Install the batteries as indicated on Command Center.

3.Close battery door by snapping in place.

4.When the four (4) batteries are installed the system will operate without power.

5.The batteries should be replaced when the LED indicates low battery or at least once a year.

36 73D0024