Monessen Hearth KHLDV500, KHLDV400 KHLDV Series Gas Fireplace, log placement, Step, 73D0024

KHLDV Series Gas Fireplace log placement

4.Place the middle log over the two burners by setting the flat surface over the burner and matching the indenta- tion located underneath the branch over the protrusion located at V-branch on the left front log placed in step #3. Rotate the right end of the log clockwise until it comes in contact with the reverse bend on the bracket located between the front and rear burner.

Step 4 LG597

5. Place the upper left log at angle over the rear and the middle logs by matching the indentation on the bottom of the log with protrusion on the rear log. Set the pointed end of the log over the flat surface of the middle log. When this log is in place the pointed end will come in contact with the back of the pilot log placed in step #2.

Step 5 LG598

6.Place the right upper log over the pilot log and the hearth brick by matching the indentation on the bottom of the log with the protrusion on the pilot log.

		Step 6	LG599
	7.	Place the upper right rear log over the rear log and the
		right upper log by matching the indentations located at
		the bottom with the protrusions on the rear log and the
		right upper log.
	8.	Replace glass in reverse order of instructions on Page
		45.
	9.	Slide the rings of the screen provided inside the unit
		above the grate over the rod. Make sure the screen
		handles are toward the center.
	10.Hook the rod screen assemblies over the three hooks
Step 7	LG600	located behind the face in front of the glass. NOTE: The
		opening of the hooks are toward the back.

48 73D0024