Monessen Hearth KHLDV400 log placement, lOG placement, KHLDV Series Gas Fireplace, Step, 73D0024

log placement KHLDV Series Gas Fireplace

lOG placement

	LG593
Burner Grate Assembly	Step 1	LG594

1.Place the rear log over the grate toward the back by positioning the holes over the large pins located at the right and left. When the log is in place, the back surface of the log will come in contact with the light trapezoid deflector.

2.Place the log over the pilot by holding the log with the wide end toward the back and the branch toward the front and left. Set the log by having the protrusion on the bottom of the log rest to the left side of the grate bar and behind the pilot shield. Also set the notch located at the bottom of the left branch over the second right tong on the grate. Make sure that the log is positioned properly so it is not rocking.

NOTE: When the log is in place, it should not touch the pilot but will be resting over the pilot shield.

Step 2 LG595

3.Place the left front log in place by setting it over the left side of the rear log (match protrusion to indentation), the hearth brick and over the left tong on the grate. Match the notch at the bottom of the branch with the tong on the grate.

Step 3 LG596

73D0024 47