NEC SX10000 When Used with Two or More Switchers (100 Inputs), How to make connections:

When Used with Two or More Switchers (100 Inputs)

Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher.

How to make connections:

1.Connect the REMOTE 1 terminal of the master Switcher to the RE- MOTE 1 of the projector using the optional control cable (15p-15p/ CTL-6010).

2.Next connect the REMOTE 2 terminal of the master Switcher to the REMOTE 1 terminal of the first slave Switcher using the same op- tional control cable as mentioned above. Third, connect the REMOTE 2 terminal of the first slave to the REMOTE 1 of the second slave, and the REMOTE 2 terminal of the second slave to the REMOTE 1 terminal of the third slave (— and the REMOTE 2 of the ninth slave to the REMOTE 1 of the tenth slave). Connect all the Switchers with optional control cables.

NOTE:

•Be sure to set all the slide switches (S8603) of the Switcher to RS-422 posi- tions. Set the one on the last slave Switcher to the appropriate position to match the connected equipment such as a personal computer. (RS-422/RS- 232C for PC control of projector)

•Set the DIP switch S8601 of the Switcher.

Signal

Switcher

Signal

REMOTE 1

OPTION (PC)

10 inputs

SLAVE 1

REMOTE 2

REMOTE

Signal

To SLOT 1

CONTROL

REMOTE 1

To SLOT 2

10 inputs

SLAVE 2

REMOTE 2

MASTER

Signal (Input 1)

To SLOT 10

SWITCHER

SLAVE 3

REMOTE 1

REMOTE

REMOTE 2

REMOTE 1

To REMOTE 2

Projector

SLAVE 9

Signal

REMOTE 1

10 inputs

SLAVE 10

REMOTE 2

OPTION

(PC)

NOTE: The optional remote control RC-6320 for ISS-6020 will not work cor-

rectly in the SW Level 1 or 2 mode.

To use the projector with the Switcher ISS-6020 in the Switcher Control mode,

*When connecting with the VIDEO INPUT MODULE (6020-VID), set the VIDEO MODE select switch (S3001) to "8". The VIDEO MODE select switch is located on the VIDEO INPUT MODULE (6020-VID).

NOTE: While in the Switcher Control mode, a video standard is selected at the projector.

If you set the VIDEO MODE select switch (S3001) to "8" with the QUAD DECODER installed in the Switcher ISS-6020, the image will not be displayed correctly. In that case, first remove the QUAD DECODER from the Switcher ISS-6020.

For more details, contact your dealer.

E – 19