External Control

RS232C

(1) D-sub 9 pin

 

Contact Closure

 

Switcher

(2) D-sub 15 pin In/Out

 

Addressable Remote Control (wired / wireless)

Power Requirement

200-240 VAC, 50/60Hz

Input Current

14 A

 

Power Consumption

2.8 kW

 

Mechanical

Installation

Orientation:

Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

 

 

Stacking:

Up to 2 projectors can be gravity stacked

 

Dimensions

26.8"(W)￿40.0"(D)￿16.5"(H) with lens hood and feet (not including stacking pads and handle)

 

680 mm(W)￿1016 mm(D)￿420 mm(H) with lens hood and feet (not including stacking pads and handle)

Net Weight

185.3 lb (84Kg) (without lens)

 

 

 

Environment

Operational Temperature:

40˚ to 95˚F / 5˚ to 35˚C,

 

 

Humidity: 20-80% non-condensing

 

 

 

Storage Temperature: 14˚ to 122˚F / -10˚ to 50˚C

 

 

Humidity: 20-80% non-condensing

 

 

Regulations

USA

UL 1950 FCC Class A

 

 

 

Canada

CSA950 ( C-UL )

 

 

 

 

Europe

EN60950

EN55022 Class A

EN55024 EN61000-3-2

EN61000-3-3

 

Japan

J60950

VCCI

 

 

 

 

Oceania

EN60950

AS/NZS3548

Class A

 

 

Asia

EN60950

CISPR22

Class A

 

*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 3/4 pixel or less around the perimeter (when projection upward angle is 0˚).

*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.

Specifications are subject to change without notice.

Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.

E – 43