NEC SX10000 Link Mode, Switcher Control

Power Management

When this option is on and there is no RGB input for five minutes or more, the projector will automatically turn itself off.

Power Off Confirmation

This option determines whether a confirmation dialog for turning off the projector will appear or not.

Keystone Save

This option enables you to save your current keystone settings. Saving your change once affects all sources. The changes are saved when you turn off the projector.

Doubler (Video / S-Video Only)

This sets double speed interpolation of the video signal.

On ................	Non-interlaced display
Off ................	Interlaced display

NOTE: The setting will take effect from the next video signal display.

Last Memory

The projector stores the last signal data in memory for each input (RGB1, RGB2, RGB3, Component [YCbCr], Video 1, Video2, S- Video1, S-Video2, RGB [DIGITAL] and SDI).

This feature will reduce switching time between sources.

If a commercially available switcher is connected, turning on this feature may cause the image to appear incorrectly.

Should this happen, turn this feature off to mute the screen during switching.

Normally if this feature is turned on when the projector is used in standalone mode, switching time between sources will be short-ened.

Seamless

This option selects modes of switching when changing input selec- tions.

During the time of switching from one input to another, you can freeze or mute an image.

On ................	Enables the Seamless feature to freeze the image for a short
	period of time during input switching.
Off ................	Disables the Seamless feature to mute the image for a short
	period of time during input switching. This will result in no
	image (black screen) at the time of input switching.

Lens Memory

This function applies the stored lens shift, focus, and zoom adjustment values to the selected signal.

The function performs a setting that enables or disables the "Adjust (Source)" - "Lens Memory" functions of the menu.

On ................	Enables the lens memory function and apply the stored shift,
	focus, and zoom setting values to the selected signal.
Off ................	Disables the lens memory function so that there will be no
	application of stored shift, focus, and zoom setting values.

NOTE: The shift, focus, and zoom adjustment values can be stored regardless of whether or not the lens memory function is enabled.

NOTE: In the Link mode the Lens Memory feature is not available.

User Name

Type in your desired name using the INPUT buttons on the remote control.

Select one character at a time with the INPUT buttons 1 through

[Page 5]

Communication Speed

This feature sets the baud rate of the PC CONTROL connector (Mini D-Sub 9 Pin).

It supports data rates from 4800 to 38400 bps.

The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected.

Projector ID

Each projector needs its own unique addresses when used in serial communication mode. You can choose one of 64 unique address using the spin box. First select Enable. Keep pressing increases the number.

To make your setting available, select OK.

Default Source Select

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last ..............	Sets the projector to default to the previous or last active in-
	put each time the projector is turned on.
Select ...........	Displays the selected source input every time the projector is
	started up. Select an input from the pull-down menu.

Link Mode

This feature is used for multiple projector connection using RGB Digital Input/Output connectors. The master projector is set to Master. The other slave projectors are set to Slave. When not using Link mode, set to Standalone. See page E-14 for setting up for double stacking in link mode.

Switcher Control

This feature sets the projector in communication with the NEC ISS- 6020 Switchers.

Stand Alone ................	Use the projector in stand alone operation.
SW 1 Level ..................	Use the projector with one Switcher. (not available
	in Link mode)
SW 2 Level ..................	Use the projector with two or more Switchers. (not
	available in Link mode)

When changing this setting, the confirmation message will appear. If you want to restart your projector, select Yes; if not, select No.

NOTE: This setting becomes effective only after the projector is restarted.

E – 39