Menu Descriptions & Functions Source Select
Enables you to select a video source such as a VCR, DVD player, laser disc player, computer or document camera depending on what is connected to your inputs.
Press the up/down buttons on your remote control or the projector cabinet to highlight the menu for the item you want to adjust.
*RGB1,2,3
*Component (YCbCr)
*Video 1, 2
*
*RGB (Digital)
*SDI
Swicher
You can select the slot number from 1 to 10 of the Switcher(s) ISS- 6020.
When using with a single Switcher
Use the SELECT ▲ or ▼ button to select the desired slot number from 1 to 10 of the
When using with two or more Switcher
Use the SELECT ▲ or ▼ button to select the master slot number from 1 to 10 and then the slave slot number from 1 to 10 on the Select Slot menu. Select OK and press ENTER.
To close the window without storing the settings, select Cancel and press ENTER.
Entry List
Displays the list of the entry signals. Use the ▲▼ buttons on your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to project the image of the selected source.
Entry Edit Command
You can edit the signal on the entry list.
To do so:
1.While pressing and holding CTL, press ENTER on the remote control to display the Entry Edit Command window.
*Cut Enables you to remove a selected signal from the list and place it on the "clipboard" in the projector.
*Copy Enables you to copy a selected signal from the list and place it on the "clipboard" in the projector.
*Paste Enables you to paste the signal placed on the "clipboard" to any other line of the list. To do this, select "Paste" and then select the line number you want to paste to. Last press ENTER.
*Edit Enables you to change source name or assign the direct key.
*The following buttons are not available for the currently projecting signals:
1) The Cut and Paste buttons on the Entry Edit Command screen
2) The Input Terminal button on the Entry Edit screen
When complete, select OK and press ENTER. To exit without storing setting, select Cancel.
Select "Source Name" and press ENTER to display the Source Name Edit window. You can change source name on this window.
Select "Input Terminal" and press ENTER to display the Input Terminal window. You can change input terminal on this window.
RGB1, RGB2, RGB3, and RGB(DIGITAL) can be selected for RGB signals; RGB1, RGB2, Component, and RGB(DIGITAL) can be selected for component signals; Video 1/2,
Select "Direct Key" and press ENTER to display the Direct Key win- dow.
You can assign specific remote keys for direct signal input selection.
NOTE: Existing direct key settings are overwritten with new settings.
E – 31