Pin No. |
| SHORT/OPEN |
| FUNCTION | ||
14 |
|
| SHORT |
| External control mode ON | |
|
|
| OPEN |
| External control mode OFF | |
|
|
|
|
|
|
|
5 |
|
| SHORT |
| POWER ON | |
|
|
| OPEN |
| POWER OFF | |
|
|
|
|
|
|
|
10 |
|
| SHORT |
| PICTURE MUTE ON | |
|
|
| OPEN |
| PICTURE MUTE OFF | |
|
|
|
|
|
|
|
4,8,12,11 | 11pin | 12pin |
| 8pin | 4pin |
|
| OPEN | OPEN |
| OPEN | OPEN | RGB 1 (INPUT 1) |
| OPEN | OPEN |
| OPEN | SHORT | VIDEO 1 (INPUT 5) |
| OPEN | OPEN |
| SHORT | OPEN | |
| OPEN | OPEN |
| SHORT | SHORT | COMPONENT (INPUT 4) |
| OPEN | SHORT |
| OPEN | OPEN | SDI (INPUT 0) |
| OPEN | SHORT |
| OPEN | SHORT | RGB 2 (INPUT 2) |
| OPEN | SHORT |
| SHORT | OPEN | VIDEO 2 (INPUT 6) |
| OPEN | SHORT |
| SHORT | SHORT | |
| SHORT | OPEN |
| OPEN | OPEN | RGB (DIGITAL) (INPUT 9) |
| SHORT | OPEN |
| SHORT | OPEN | RGB 3 (INPUT 3) |
|
|
|
|
|
|
|
*When the combinations other than specified in the above table are selected, the input will be forcefully switched to RGB 1.
*The term “SHORT” means to connect with pin 15
*When in the external control mode, the POWER, INPUT, PICTURE MUTE and SOUND MUTE buttons on the remote control will not function.
NOTE: Pin 13 is the external remote signal terminal. The projector can be controlled by the same format signal as the supplied remote control from the external controller regardless of setting on Pin 14.
NOTE: When turning off the power to the projector using the external control, do not disconnect the plug from the power outlet. These procedures are to protect your projector and the connected equipment.
E – 22