Digital Entertainer Express EVA9100 User Manual
2.Set the video source selector on your TV to match the connection from your Digital Entertainer Express. For example, if you used HDMI, set the TV to use Digital HD or HDMI input.
Note: If your TV has multiple inputs of a specific type (such as HDMI1 or HDMI2), make sure that you have selected the correctly numbered input.
TV brands use different methods to identify their video source selectors. Many use a numbering system such as Input 1, Input 2 and so on. Others use names that vary according to the manufacturer. Check the instructions that came with your TV if you are not sure.
3.Check the TV display. If it is not clear, aim the remote control at the Digital Entertainer Express, and press TV Mode. You can cycle through the TV modes to get the best display. It can take 3 or 4 seconds for each TV mode change.
4.When prompted, select a language.
5.When you hear the audio welcome tone, press 
.
If you do not hear the audio welcome tone, check the connections to the Digital Entertainer Express.
6.Select Custom Setup, and then specify the following settings:
•Select the video mode. The selections that you see on the screen change if you use an HDMI connection.
Table 1-2. Video Modes
Type of Cable and | Available Video Modes | |
Region | ||
| ||
|
| |
Analog cables | Standard TV NTSC 480i (works for most TVs in the US) | |
| Standard TV 480p | |
| HDTV Component 720p | |
| HDTV Component 1080i | |
| HDTV Component 1080p | |
| HDTV Component 720p 50Hz | |
| HDTV Component 1080i 50Hz | |
| HDTV Component 1080p 50Hz | |
|
|
Custom Installation and Configuraton |
