NetGear Print Server Manual
Protocol
computers. The factory default is enable.
TCP/IP Tab
This tab allows configuration for the TCP/IP network protocol.. For further information about TCP/IP, refer to Chapter
| Figure |
TCP/IP Tab Fields | |
|
|
Field | Description |
|
|
DHCP | This field allows you to enable or disable the print server's ability to get its IP address from a DHCP |
| (Dynamic Host Configuration Protocol) server. When disabled, you can provide a fixed IP address in the |
| following fields. |
|
|
IP Address | This IP address is assigned to the print server. If you have a private LAN and do not plan to connect to the |
| |
| private addresses (for example, 192.168.x.x or 10.x.x.x). |
|
|
101
