NetGear Print Server Manual

Appendix E IP Setup

This appendix provides a brief overview of IP addressing.

Overview

This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or assigned a wrong subnet IP address.

The following table describes each setting.

IP Configuration Settings

 

 

Setting

Recommended Value

 

 

Device Name

Shown on a sticker on the base of the device in the form "PSxxxxxx."

 

 

Device IP Address

192.168.0.1

 

 

Gateway IP Address

0.0.0.0

 

 

Subnet Mask

0.0.0.0

Clicking on Reset will set all values back to zero, and clicking on OK sets the data entered. Ensure that the IP address assigned to the device is not already in use.

Following picture is the NETGEAR Print Server IP Address Configuration window.

NETGEAR Print Server IP Address Configuration

130

Page 139
Image 139
NETGEAR PS100 manual Appendix E IP Setup, IP Configuration Settings, Setting Recommended Value