NETGEAR PS100 manual Netgaer Print Server window opens, as illustrated below

NetGear Print Server Manual

To set up each PC:

1.Double-click on the desktop icon, as showing Figure 4-8, that you named the group in the previous section, Figure 4-5.

2.Double-click on NETGAER Print Server Setup Wizard in the NETGEAR Print Server window.

The NETGAER Print Server window opens, as illustrated below.

Figure 4-10 NETGEAR Print Server Setup Wizard Window

3.In this window, you will see whatever network protocols you have installed on the local machine.

You need TCP/IP to use web management. Most nowadays operating systems including Microsoft Windows 98, ME, 2000, and XP use TCP/IP as the primary networking protocol.

PS101 and PS111W do not support NetWare IPX/SPX environment.

Older system, like Microsoft Windows 3.1, may support only Netbios protocol as the Microsoft Network. You must have either TCP/IP or Netbios protocol, or both to use NETGAER PS100 Series print server.

38