NETGEAR PS100 manual System Tab Fields

NetGear Print Server Manual

		Figure 8-4 System Tab Window
System Tab Fields
	Field	Description
	Device	Choose a descriptive name for the router for identification purposes (for example, EngPrsv). This name is
	Name	used in all protocols to identify the specific print server. There is a factory default name. For any change,
		NETGEAR recommends that a name be determined before setting the print server in any network. This
		name should be no more than 16 characters with at least a non numeric letter. Spaces are not allowed, but
		dashes (-) and underscore marks (_) are accepted.
	IPX/SPX	Choose to enable or disable the IPX/SPX protocol used in the NetWare environment. This selection is
	Protocol	always shadowed to indicate that the IPX/SPX protocol is always active and cannot be disabled.
	TCP/IP	Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking and Microsoft
	Protocol	networking. The factory default is Enable.
	NetBEUI	Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a small-scale Microsoft
	Protocol	networking environment.
	AppleTalk	Choose to enable or disable the AppleTalk Protocol. AppleTalk is used in small networks of Apple

100