Making connections 7

Programming a universal remote control

to work with your TV

You can operate your TV with a new or existing universal remote
control.
To program a universal remote control:
1Find the code for your universal remote control by identifying its
model (or your set-top box’s remote control manufacturer and
model) on the charts below, then make note of the numbered
code below it. You will use the numbered code to program your
remote control to work with your TV.
Codes for other remote controls are available online at:
www.dynexproducts.com\t-customer_support.aspx
Tips:
• The brand name is often visible on the front of the universal remote
control, and the model number is often visible on the back.
• If your universal remote control isn’t listed on the chart, refer to your
universal remote control’s instructions and try codes for the brands
Orion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may need
to try several codes before finding a match.
2Follow your universal remote control’s instructions to enter the
code you found in Step 1.
Tips:
• If your universal remote control has a code search feature, run a code
search to identify a code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn” feature, you can
manually program it using your TV remote to “teach” the commands
one at a time. See your universal remote control’s instructions for
details.
3If all else fails, you must use a different universal remote control
that can operate both your set-top box and your TV. Five such
remotes are listed on the chart, but many other compatible
models are available in the market.
For more help, call technical support for your universal remote
control or set-top box manufacturer, or call the Dynex Customer
Care Center at 1-800-305-2204.
Making connections
Cautions:
Check the terminals for position and type before making any connections.
Loose connections can result in image or color problems. Make sure that
all connections are tight and secure.
The external audio/video equipment shown in these illustrations may be
different from your equipment. If you have questions, refer to the user
manual that came with your equipment.
Always turn the power off when connecting external equipment.
Your TV does not support DTS audio format. If you choose a DTS audio
format, you may not hear the correct audio output from the TV
speakers.

Connecting the power

To connect the power:
• Connect the power cord to the AC in connector on the back of
your TV, then plug the cord into an AC power outlet.
Important: Your TV only works on 120 V, 60 Hz power.
Notes:
Your TV should only be operated from the power source indicated on the
label.
Always unplug the AC power cord from the AC power outlet when you will
not be using your TV for an ex tended period of ti me.

Connecting an antenna, cable TV, or

satellite TV box

Important: The antenna connector should only be f inger-tightened. Do
not tighten this connector with any tool, or you may damage your TV.
To connect an antenna, cable TV, or satellite TV box:
1Turn off the TV before connecting the antenna.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
115 135 0464 8043
Set-top box manufacturer and model
Comcast
M1057
Dish
Network
VIP508,
VIP622
Motorola
DRC800
TIVO
Series 3, HD
DirectTV
RC23
0463 720 0463 0091 10463
DX-L321-10A_09-0407_MAN_ENG_V3.book Page 7 Wednesday, May 13, 2009 11:38 AM