Honeywell VISTA-15P, VISTA-20P setup guide Wireless Key Predefined Default Templates, Not Confirmed

Menu Mode Programming

	Confirm
XMIT TO CONFIRM
	[∗] to continue
PRESS ✱ TO SKIP
	• If “Yes” was entered at the SET TO CONFIRM? prompt previously (see first prompt
	following entry into the ∗58 Expert Programming Mode), the display on the left will
	appear. Confirm serial and loop numbers by activating the wireless key.
	IMPORTANT:
	When confirmed, the key is not active for arming/disarming until it is assigned to a user
	number (using the assigning attributes command, attribute “4”). See System Operation
	section for procedure.
	Not Confirmed
Entd A022-4063
	[∗] to continue
Rcvd A022-4064
	If the serial number transmitted does not match the serial number entered, a display
	similar to the one shown will appear. If the loop number does not match, it will also be
	displayed.
	If so, activate the button on the wireless key once again. If a match is not obtained (i.e.,
	summary display does not appear), press the [#] key and then enter the correct serial
	number.
	If the serial number transmitted matches the serial number entered, the keypad will beep
	3 times and will return you to the Zone Number prompt to enter the starting zone for the
	next wireless key.
	Or you can return to *58 Menu mode by pressing 00 at the Zone Number prompt.
	NOTE: Following the successful enrollment of each wireless device, remove ONE of the
	serial number labels from the device and affix it in the appropriate column on the ZONE
	PROGRAMMING worksheet of the Programming Form; then enter the other information
	(zone number, zone type, loop number, etc.) relevant to that device.
	Wireless Key Predefined Default Templates

		LOOP 3
YOU MUST	OFF	LOOP 2
PROGRAM
	ON
THIS BUTTON		LOOP 1
LOOP 4

ENROLL AS "BR"

5 8 0 4 - 0 0 1 - V 1

5804 Wireless Key Transmitter

Note:

These transmitters are not intended for use in UL installations.

GREEN/YELLOW
LED			LOOP 2
RED/YELLOW			LOOP 4
LED
			(YOU MUST
			PROGRAM
			THIS BUTTON)
LOOP 3
			LOOP 1
•	• •	•	•
	•	•
•	••		•
•••		••
ENROLL AS "BR"	••	•
			5 8 0 4 B D - 0 0 7 - V 0

5804BD 2-Way Wireless Key

Transmitter

	For 5804				For 5804BD
TEMPLATE 1	Loop	Function	Zone Type	TEMPLATE 4	Loop	Function	Zone Type
	1	No Response	23		1	No Response	23
	2	Disarm	22		2	No Response	23
	3	Arm Away	21		3	Arm Away	21
	4	No Response	23		4	Disarm	22
TEMPLATE 2	Loop	Function	Zone Type	TEMPLATE 5	Loop	Function	Zone Type
	1	No Response	23		1	No Response	23
	2	Disarm	22		2	Arm Stay	20
	3	Arm Away	21		3	Arm Away	21
	4	Arm Stay	20		4	Disarm	22
TEMPLATE 3	Loop	Function	Zone Type	TEMPLATE 6	Loop	Function	Zone Type
	1	24-hour audible	7		1	24-hour audible	7
	2	Disarm	22		2	Arm Stay	20
	3	Arm Away	21		3	Arm Away	21
	4	Arm Stay	20		4	Disarm	22

5-7