Honeywell VISTA-15P Keypad Functions, Voice Keypads, Keypad Commands, Function Description

System Operation

Keypad Functions

The following is a brief list of system commands. For detailed information concerning system functions, refer to the User's Manual. For Touch Screen style keypad users, refer to the separate Touch Screen keypad (AUI) User’s Guide.

Voice Keypads

The 6150V/6160V Voice Keypads provide the following features:

•Message Center, which lets the user record and playback one message.

•Voice Status, which can announce system status by using the STATUS key.

•Voice Chime, which can alert users to the opening of doors/windows while the system is disarmed. Refer to the User Guide for specific procedures for activating and using these features.

Keypad Commands

Function	Description
Silence alarms	Pressing any key will silence the keypad sounder for 10 seconds. Disarming the system will
	silence both keypad and external sounders.
Quick Arm	If enabled (field ∗21), you can press [#] in place of the system's security code, plus the
	desired arming key (Away, Stay, Instant, Maximum)
Single-Button arming	If programmed (*57 Function Key menu mode), lettered keys A-D can be used for arming,
	using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming
	If used, no security code is required to arm the system.
Alarm Memory	When the system is disarmed, any zones that were in an alarm condition during the armed
	period will be displayed. To clear this display, simply repeat the disarm sequence (enter
	the security code and press the OFF key) again.
Arming Away	Enter code + AWAY [2] or simply press appropriate lettered key on the keypads (see
	“Single-Button Arming” above). If the “Auto-Stay Arm” feature is enabled (field *84) and
	the entry/exit door is not opened and closed within the programmed exit delay time, the
	system will automatically arm in STAY mode if armed from a wired keypad (non-RF
	device). If the door is opened and closed within the exit delay period, the system arms in
	AWAY mode.
Arming Stay	Enter code + STAY [3] or simply press appropriate key on the keypads (see “Single-Button
	Arming” above). See “Arming Away” above for Auto-Stay arming feature.
Arming Night-Stay	Enter code + STAY [3] + STAY [3] or simply press appropriate key on the keypads (see
	“Single-Button Arming” above).
Arming Instant	Enter code + INSTANT [7].
Arming Maximum	Enter code + MAXIMUM [4] or simply press appropriate lettered key on the keypads (see
	“Single-Button Arming” above).
Disarming	Enter code + OFF [1]. If entry delay or an alarm is active, you do not need to press
	OFF.
Bypassing Zones	Enter code + BYPASS [6] + zone number(s).
Forced (Quick) Bypass	To automatically bypass all faulted zones, use the “Quick Bypass” method. Enter code +
	BYPASS + [#], then wait for all open zones to be displayed. Arm when display indicates
	“ZONE BYPASSED” and “READY TO ARM”.
Chime Mode	Enter code + CHIME [9]. To turn chime off, enter code + CHIME again.
Activate Output	If relay outputs (via a 4204, or 4229), or Powerline Carrier devices are used, two keypad
Devices	entries available to the user are included. If programmed, these entries can be used to
	manually activate or deactivate the device(s) for starting or stopping some action, such as
	turning lights on or off, etc. These keypad entries are:
	[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device.
	[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device.

6-5