NetGear Print Server Manual

Configure Server Fields

Print Server Name

Password Confirm Password

Enable Protocols

Choose a descriptive name for the print server for identification purposes. This name is used in all protocols to identify the specific print server. There is a factory default name. For any change, NETGEAR recommends that a name be determined before setting the print server in any network. This name should be no more than 16 characters with at least a non numerical letter. Spaces are not allowed, but dashes (-) and underscore marks (_) are accepted.

Enter the device password, and again in the Confirm Password field. Once a password is entered, it is required in order to gain access and change the configuration. If you forget the password to the print server, the only way to reset it is by resetting the device to factory default through the NETGEAR Print Server Administration Program.

Check the corresponding protocols to enable them on the print server. AppleTalk is used to support AppleTalk printing from Apple computers. NetBEUI is primarily used in a small-scale Microsoft networking environment. A protocol may be disabled if it is not required for your network.

11

Page 20
Image 20
NETGEAR PS111W manual Configure Server Fields, Print Server Name Password Confirm Password Enable Protocols