Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Figure 3-11: IP Settings menu
•Access Point Name (NetBIOS)
Enter a new name for the wireless access point and click Apply to save your changes.
•The IP Address
The wireless access point is shipped preconfigured with its DHCP client disabled and with the following private static IP addresses:
–IP Address — 192.168.0.228
–IP Subnet Mask — 255.255.255.0
–Gateway — 0.0.0.0
–Primary and Secondary DNS Servers — 0.0.0.0
If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu. These settings are only required if the “Use this IP address” radio button is chosen. Remember to click Apply to save your changes.
•Spanning Tree Protocol
Basic Installation and Configuration |
September 2004
