Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Table | General Information Fields | |
|
|
|
Field |
| Description |
|
| |
Country/Region | Displays the domain or region for which the wireless access point is | |
|
| licensed for use. It may not be legal to operate this wireless access |
|
| point in a region other than one of those identified in this field. |
Firmware Version | The version of the firmware currently installed. | |
|
| |
Access Point Mode | Identifies the operating mode of the WG302: Access Point, | |
|
| |
Current IP Settings |
| |
IP Address |
| The IP address of the wireless access point. |
Subnet Mask |
| The subnet mask for the wireless access point. |
|
| |
Default Gateway | The default gateway for the wireless access point communication. | |
|
| |
DHCP Client |
| Enabled indicates that the current IP address was obtained from a |
|
| DHCP server on your network. Disabled indicated a static IP |
|
| configuration. |
Current Wireless Settings |
| |
Operating Mode | Identifies the 802.11 operating mode of the WG302. | |
|
| |
Wireless Network Name (SSID) | Displays the wireless network name (SSID) being used by the | |
|
| wireless port of the wireless access point. The default is NETGEAR. |
Channel/Frequency | Identifies the channel the wireless port is using. 11 is the default | |
|
| channel setting. See “Wireless Channels” on page |
|
| frequencies used on each channel. |
WEP/WPA |
| WEP/WPA setting. |
|
|
|
|
|
|
Statistics
The Information - Statistics screen provides various LAN and WLAN statistics.
Management |
September 2004