NETGEAR WGR826V manual Default Factory Settings

Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V

Default Factory Settings

When you first receive your WGR826V, the default factory settings are shown below. You can restore these defaults with the Factory Default Restore button on the rear panel. After you install the WGR826V Wireless Router, use the procedures below to customize any of the settings to better meet your networking needs.

WIRELESS FEATURE	DEFAULT SETTING
Wireless Access Point	Enabled
SSID broadcast	Enabled
Network Name (SSID)	NETGEAR
WPA and WEP Security	Disabled

Warning: The Network Name (SSID) and passphrase are case sensitive. Typing nETgear for the SSID will not work.

Optimizing Wireless Connectivity and Security 5-5

202-10051-01, March 2005