Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
–NTP Server
•QoS
–MSS Value - This value indicates the Maximum Segment Size (MSS), which will be set to the TCP connections that are initiated while Voice call is in progress.
–Gap Interval - This value indicates the
–Packet Threshold - This value indicates the packet length for packet classification and scheduling. The data packets are classified based on packet length. Packets of length less than or equal to this threshold value are given higher priority over others.
–Uplink Bandwidth - This value indicates the current uplink bandwidth. It is computed from Gap Interval so configured by provisioning server (SASVP).
•VoIP Configuration
–Registration Proxy - This parameter indicates the domain to be specified in the REGISTER requests sent to the NAT Proxy.
•Port - This indicates the UDP/ TCP port of Registration Proxy.
•Transport - This parameter indicates the transport (UDP/TCP) to be used for communicating with Registration Proxy.
•Expires - This value indicates the interval at which REGISTER requests are sent to the Registration Proxy.
–NAT Proxy - This parameter indicates the Server to which the SIP requests need to be sent.
•Port - This indicates the UDP/ TCP port of NAT Proxy.
•Transport - This parameter indicates the transport (UDP/TCP) to be used for communicating with NAT Proxy.
–Proxy Domain - This parameter indicates the domain of SIP to be specified in the SIP request messages (other than REGISTER) sent to the NAT Proxy.
•Port - This indicates the UDP/ TCP port of Proxy Domain.
•Transport - This parameter indicates the transport (UDP/TCP) to be used for communicating with Proxy Domain.
Doing Basic Router Housekeeping |
