
Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
–Digit Timer
–Critical Timer - This value in seconds indicates the last digit
–Long Connect Timer- This value in seconds indicates the maximum time the Router can wait for the customer to dial digits before it initiates connection setup.
–DTMF Relay State - This state indicates whether the dialed digits need to relayed through the server or not. If it is disabled, the digits are sent
–DTMF Relay Payload - This value indicates the Payload value to be used in the RTP packets sent for DTMF relay.
–DTMF Relay Repetitions - This value indicates the repetition rate to RTP packets sent for DTMF relay.
–Receive Gain - This value in dB indicates the gain of speech to be played on the voice ports, received over the network.
–Transmit Gain - This value in dB indicates the gain of speech sent out of the voice ports over the network.
–RTP Packet Sequence Check - This parameter indicates whether sequence number to be checked is in the received RTP packets.
–Subscribe Timer - This value indicates the interval at which SUBSCRIBE requests are sent to the server to get the voice mail notifications.
–Jitter Control - This state indicates whether Jitter Control is enabled or not. It gives the minimum and maximum jitter queue lengths if Jitter Control is enabled.
–Emergency Service # - Indicate the Telephone number(s) of Emergency service.
•
–Phone Number - Telephone number of port
–Display Name - Name of the customer
–Business Group ID - Business Group Id of the customer
–Password - Password used for digests sent in SIP REGISTER/ INVITE messages sent to the server
Doing Basic Router Housekeeping |