Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V

f.Securely insert the cable that came with your wireless router (the NETGEAR cable in the diagram below) into a LAN port on the router such as LAN port 4 (point C in the diagram), and the other end into the Ethernet port of your computer (point D in the diagram).

&RPSXWHU

D

1(7*($5 &DEOH

C

 

,QWHUQHW

5RXWHU

0RGHP

+†™j

3KRQH

/$1

3RUWV

3RUWV

 





Figure 3-3: Connect the computer to the wireless router

If you have AT&T CallVantageSM Service or plan to order it, connect a telephone to Phone Port 1 on the Wireless Router using a standard phone cord (not included).

Your network cables are connected and you are ready to restart your network.

2.RESTART YOUR NETWORK IN THE CORRECT SEQUENCE

Warning: Failure to restart your network in the correct sequence could prevent you from connecting to the Internet.

a.First, plug in and turn on the broadband modem. Wait about 2 minutes.

b.Now, plug in the power cord to your wireless router. Wait about 2 minutes.

c.Last, turn on your computer.

Note: For DSL customers, if software logs you in to the Internet, do not run that software. You may need to go to the Internet Explorer Tools menu, Internet Options, Connections tab page where you can select “Never dial a connection.”

Connecting the Router to the Internet

3-3

202-10051-01, March 2005

Page 21
Image 21
NETGEAR WGR826V manual Restart Your Network in the Correct Sequence