NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual

Configuring WEP Wireless Security

WEP Shared Key authentication and WEP data encryption can be defeated by a determined eavesdropper using publicly available tools.

WEP offers the following options:

Open System. With Open System authentication and 64 or 128 bit WEP data encryption, the WNR3500 router does perform data encryption but does not perform any authentication. Anyone can join the network. This setting provides very little practical wireless security.

Shared Key. With Shared Key authentication, a wireless device must know the WEP key to join the network. Select the encryption strength (64 or 128 bit data encryption). Manually enter the key values, or enter a word or group of printable characters in the Passphrase field. Manually entered keys are not case-sensitive, but passphrase characters are case-sensitive.

To configure WEP data encryption:

Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. You must then either configure your wireless adapter to match the wireless router WEP settings or access the wireless router from a wired computer to make any further changes. Not all wireless adapter configuration utilities support passphrase key generation.

1.Select Wireless Settings under Setup in the main menu.

2.In the Security Options section, select WEP. The WEP options display.

Safeguarding Your Network

2-9

v1.0, March 2008

Page 33
Image 33
NETGEAR WNR3500 user manual Configuring WEP Wireless Security