NETGEAR WNR3500 user manual Using the Software Button in the Add WPS Client Screen

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual

2.On the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router.

The WNR3500 router’s green	button light ceases blinking and remains on when one of
these conditions occurs:

•The router and the client establish a wireless connection.

•The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be specified in the WNR3500 router.

Using the Software Button in the Add WPS Client Screen

1.Log in to the router as described in “Logging In to Your Wireless Router” on page 1-2.

2.Select Add WPS Client in the main menu, and click Next.

3.Select the Push Button setup method.

Figure 2-6

4.Click the button in the Add WPS Client screen. The following screen displays:

Figure 2-7

The green button light on the WNR3500 router begins to blink in a regular pattern. While the button light is blinking, you have 2 minutes to enable WPS on the device you are trying to connect to the router.

Safeguarding Your Network 2-15

v1.0, March 2008