
NETGEAR RangeMax™
In the scenario shown, the following conditions must be met for both APs:
•Both APs must use the same SSID, wireless channel, authentication mode (if any), and encryption mode (see information about WEP in “Configuring WEP Wireless Security” on page
•Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the same network.
•All LAN devices (wired and wireless computers) must be configured to operate in the same LAN network address range as the APs.
•If you are using DHCP, the Get Dynamically From ISP Gateway radio button in the Internet IP Address section of the Basic Settings screen should be selected for all AP devices in the IP Address Source section.
Wireless Repeating Function
You can view or change wireless repeater settings for the wireless router. From the main menu of the browser interface, under Advanced, click Wireless Repeating Function to display the Wireless Repeating Function screen.
Figure
Customizing Your Network Settings |