NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
Plug-in and Boot Up
1.Plug the power cord from the monitor into the power outlet.
2.Connect each AC adapter power connector to the 9VDC ports on the Remote and Local Units. Make sure the power connectors go into each port all the way. Plug each AC adapter into a power outlet. The yellow LED on the RJ45 connector of both the Remote and Local Units should illuminate, indicating that a proper power connection has been made to them. (See Fig. 4.)
Figure 4- Connect the AC adapters
Note: The green LED on each RJ45 connector will blink anytime data traffic is passing between the Local and Remote Units, indicating proper CAT5 cable connection and communication. (See Fig. 4)
7
