Network Technologies SM-nXm-C5AV-LCD operation manual The Remote Unit

NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5

The Remote Unit

1.Position the Remote Unit such that the CAT5 cable, the monitor cable, speaker cable, and the AC adapter power connector can each reach the Remote Unit comfortably.

2.Connect the monitor cable to the female 15HD video connector on the Remote Unit.

3.Connect the speakers to the 3.5mm jack on the Remote Unit (see Fig. 3).

Figure 3- Connect the Extended Components to the Remote Unit

4. Connect the CAT5 cable to the “Cat 5” port on the Remote Unit. (See Fig. 3.) When properly inserted the CAT5 cable end should snap into place.

Note: If an RJ45 wall outlet is being used, connect the other end of the extension cable to the RJ45 wall outlet.

!WARNING: Never connect the ST-C5VA-600 Extender to an Ethernet card, Ethernet router, hub or switch or other Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may result.

6