From the menu screen, select the ztab to display the setup menu, and then you can change the following settings.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
Setup Camera General
94
Option | Description | A |
| Select the image displayed as the welcome screen |
|
| when the camera is turned on. Select COOLPIX to |
|
Welcome screen | display the COOLPIX logo. Select Select an image to | |
| use a picture taken with the camera as the welcome |
|
| screen. The default setting is None. |
|
|
|
|
| Set settings related to the camera’s date and time. The |
|
| Time zone setting allows you to specify the time zone |
|
| where the camera is mainly used and whether or not |
|
| daylight saving time is in effect. When the xtravel |
|
Time zone and date | destination is selected, the camera automatically | |
| calculates the time difference between the travel |
|
| destination and the whome time zone, and saves |
|
| images using the date and time of the travel |
|
| destination. |
|
|
|
|
| In Photo info, select the kind of information that is |
|
| displayed on the monitor during shooting mode and |
|
Monitor settings | playback mode. If you select Framing grid+auto info, | |
| a framing grid is displayed when shooting to help you |
|
| frame the picture. Also, set the image review display |
|
| after shooting and the screen brightness. |
|
|
|
|
| Imprint the shooting date and time on pictures at the |
|
| time of shooting. The default setting is Off. |
|
Print date | • When the scene mode is set to Sports, Museum, | |
| Backlighting with HDR set to On, Panorama, Pet |
|
| portrait with Continuous, or when recording |
|
| movies, date cannot be imprinted. |
|
|
|
|
| Reduce blurring caused by camera shake when |
|
| shooting. The default setting is On. | |
Vibration reduction | • When using a tripod to stabilize the camera, set this | |
| feature to Off to prevent this feature from |
|
| malfunctioning. |
|
|
|
|