Step 1 Turn the Camera On

Turning the Camera On and Off

•When the camera is turned on, the power-on lamp (green) lights, and the monitor is turned on (the power-on lamp turns off when the monitor is turned on).

•To turn off the camera, press the power switch. Both the monitor and the power-on lamp are turned off.

•Hold down the c(playback) button to turn on the camera in playback mode.

CPower Saving Function (Auto Off)

If no operations are performed for a while, the monitor will be turned off, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically.

While the camera is in standby mode, the monitor is turned on again when any of the following buttons is pressed.

➝Power switch, shutter-release button, A(shooting mode) button, c(playback) button, or b(emovie-record) button

Blinks

Playback and Shooting of Basics The

No operations

No operations

performed.

performed.

5 0 s

2 1

 

3 min

Camera enters

Camera turns off.

standby mode.

 

• The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A94).

• In the default setting, the camera enters standby mode in about five minutes when you are using shooting mode or playback mode.

• If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30 minutes.

23