Specifications
Operating environment |
| ||
| Temperature | ||
| 0°C to 40°C (32°F to 104°F) (for underwater use) | ||
|
| ||
| Humidity | 85% and below (no condensation) | |
|
| JIS/IEC protection class 8 (IPX8) equivalent (under our testing | |
Waterproof | conditions) | ||
Capacity to shoot pictures underwater up to a depth of 10 m | |||
|
| ||
|
| (33 ft) and for 60 minutes | |
Dustproof | JIS/IEC protection class 6 (IP6X) equivalent (under our testing | ||
conditions) | |||
|
| ||
Shockproof | Cleared our testing conditions3 compliant with | ||
Method | |||
|
|
•Unless otherwise stated, all figures are for a camera with a
1Based on Camera and Imaging Products Association (CIPA) standards for measuring the life of camera batteries. Measured at 23 (±2) °C (73 (±4) °F); zoom adjusted with each shot, flash fired with every other shot, Image mode set to P, 4608×3456. Battery life may vary
depending on shooting interval and length of time menus and images are displayed.
2When recording a single movie, the maximum recording time is 29 minutes and file size is up to 4 GB even when there is enough free space on the memory card.
3Dropped from a height of 152 cm (60 in.) onto a surface of 5cm (2 in.) thick plywood (changes in appearance, such as paint peeling off and deformation of the drop shock portion and waterproof performance are not subject to the test).
These tests do not guarantee that the camera will be free from damage or trouble under all conditions.
Index and Notes Technical
F22