Using Panorama Assist
4Shoot the next picture.
•Match the outline of the next picture so that 1/3 of the frame overlaps the previous picture, and press the
•Repeat until you have taken the necessary number of pictures to complete the image.
29m 0s
End 1341
Section Reference
5Press the kbutton when shooting is completed.
• The camera returns to step 2.
BNotes on Panorama Assist•Set the flash mode,
•The panorama series is terminated if the auto off function (E77) triggers the standby mode during shooting. To prevent this, setting a longer time for the auto off function is recommended.
CR(exposure lock) IndicatorWhen using panorama assist mode, all pictures in the panorama have the same exposure, white balance, and focus as the first picture of the panorama.
When the first picture is shot, Ris displayed on the monitor to indicate that exposure, white balance, and focus are locked.
29m 0s
End 1341
CPanorama CreationTransfer pictures taken to a computer (A76) and use Panorama Maker 5 to join them in a single panorama.
Install Panorama Maker 5 on a computer using the included ViewNX 2 Installer CD.
CMore Information
See “File and Folder Names” (E85) for more information.
E6