The Smart Portrait Menu

Blink Proof

Display the shooting screen in smart portrait mode (A49) Mdbutton MFtab (A11) MBlink proof

When On is selected, the camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject’s eyes are open is saved.

If the camera saved an image in which the subject’s eyes may have been closed, the dialog shown on the right is displayed for a few seconds.

Flash cannot be used when On is selected.

The default setting is Off.

When blink proof is enabled, the icon for the current

setting is displayed on the monitor during shooting (A6). When Off is selected, an icon for the current setting is not displayed.

A blink was detected in the picture just taken.

Section Reference

E33