Features Shooting
Features That Can Be Set Using the Multi Selector
Flash Modes (Using the Flash)
You can set a flash mode that suits the shooting conditions.
1 Press H(mflash mode) on the multi selector.
2Press the multi selector to select the desired
mode and press the kbutton.
• See “Available Flash Modes” (A55) for more information.
•If the kbutton is not pressed within a few seconds,
the selection will be canceled. | Flash mode |
•When U(auto) is applied, Dis only displayed for
a few seconds, regardless of Photo info settings (A94).
3Frame the subject and take a picture.
• The flash lamp indicates the status of the flash when you press the
- On: The flash will fire when you press the shutter- release button all the way.
- Blinking: The flash is charging. The camera cannot take pictures.
- Off: The flash will not fire when a picture is taken.
•If the battery is low, the monitor will be turned off while the flash is charging.
CEffective Range of the FlashThe flash has a range of about 0.3 to 3.5 m (1 ft to 11 ft) for
540.5 to 2.2 m (1 ft 8 in. to 7 ft 2 in.) for telephoto zoom position (when ISO sensitivity is set to Auto).