
The Setup Menu
Action Control Response
Press the dbutton Mztab (A11) MAction control response
Set the sensitivity of the operation performed when shaking the camera (action control) (A13). When this option is set to High (default setting), the operation is performed even if the camera shake movement is small. When this option is set to Low, the operation is performed if the camera shake movement is large.
BNote on Action Control ResponseWhen viewing images with Quick playback of action control or in
Auto Off
Press the dbutton Mztab (A11) MAuto off
If no operations are performed for a certain period while the camera is on, the monitor is turned off to save power and the camera enters standby mode (A23). This option sets the amount of time allowed to elapse before the camera enters standby mode.
Choose from 30 s, 1 min, 5 min (default setting) and 30 min.
Section Reference
CAuto Off SettingIn the following situations, the time taken for the camera to enter standby mode is fixed.
•When menus are displayed: three minutes
•During slideshow playback: maximum of 30 minutes
•When the AC Adapter
E77