Nikon CM200 service manual Main Shield Removal, PA Shield and DC Cable Removal

Radio Disassembly - Detailed 2-7

6.3Main Shield Removal

1.Insert the screw driver in the gap between the main shield and chassis (speaker cutout area) and push the shield up. See Figure 2-6.

2.Lift the cover from the chassis.

Figure 2-6Main Shield Removal

6.4PA Shield and DC Cable Removal

1.Remove the three screws that attach the PA shield to PCB, and remove the PA shield.

2.Remove the accessory Connector cap.

3.Remove the two screws that attach the DC power cable to the PCB and pull it out from the side.

DC

CablePA Shield

Fixing Screws (3)

	DC Cable
Accessory	Fixing Screws
	(2)
Connector
Cap

Figure 2-7PA Shield and DC Cable Removal (for Low Power Models)