Nikon CM200 service manual Transceiver Performance Testing

iv

	7.3	Control Heads Assembly	2-13
	7.4	Control Head Fitting	2-13
	7.5	Option Board Installation	2-14
8.0	Radio Exploded Mechanical Views and Parts Lists		2-15
	8.1	Radio Assembly - 1-25 W Models	2-15
	8.2	Radio Assembly - 25-40 W/25-45 W Models	2-16
	8.3	Control Head - CM200	2-17
	8.4	Control Head - CM300/PM400	2-18
9.0	Service Aids		2-19
10.0	Test Equipment		2-20
11.0	Programming/Test Cable - RKN4083_		2-21
12.0	Adapter Cable - FKN8113_		2-22
Chapter 3		TRANSCEIVER PERFORMANCE TESTING
1.0	General		3-1
2.0	Setup		3-1
3.0	RF Test Mode		3-2
Chapter 4		RADIO TUNING AND PROGRAMMING
1.0	Introduction		4-1
2.0	CPS Programming/Flashing Setup with RIB		4-1
3.0	CPS Programming/Flashing Setup Ribless		4-2
4.0	CPS Programming Setup with RIB (with Telco Connector)		4-2
5.0	CPS Programming Setup with RIB (Accessory Connector)		4-3
6.0	CPS Programming Setup with RIB		4-3
7.0	Radio Tuning Setup		4-4
	7.1	Initial Test Equipment Control Settings	4-4
Chapter 5		POWER UP SELF-TEST
1.0	Error Codes		5-1
Chapter 6		ACCESSORIES & CONNECTOR PIN FUNCTIONS
1.0	Accessories		6-1
	1.1	Antennas	6-1
	1.2	Audio	6-2
	1.3	Alarms and Accessories	6-2
	1.4	Control Station	6-3
	1.5	Public Address	6-3
	1.6	Cables	6-3
	1.7	Mounting	6-3
	1.8	Data - CES Wireless Technologies	6-4