Nikon CM200 service manual CPS Programming/Flashing Setup with RIB, Description Kit Number, Cps

Chapter 4

RADIO TUNING AND PROGRAMMING

1.0Introduction

This chapter provides an overview of the Customer Programming Software (CPS) and tuner program designed for use in a Windows 98/ME/NT/2000 environment.

NOTE Refer to the CPS on-line help files for programming procedures.

Table 4-1Software Installation Kits Radio Tuning Setup

Description	Kit Number
CPS	RVN4191_

2.0CPS Programming/Flashing Setup with RIB

The CPS programming setup, shown in Figure 4-1 is used to program and flash the radio using the Radio front Telco connector.

FKN8096		8-pin Telco
	FKN8096
Data =Programming
Boot = Flashing
		10-pin Telco

Programming Cable 3080070N01

Radio	ACC
		DC
					Power
		RF			Supply
							DB15
				RIB				Tx Data
			RLN-4008					Rx Data
								Gnd
DB25
						Cable 3080369B72 (9 PIN)
						Cable 3080369B71 (25 PIN)

Figure 4-1CPS Programming/Flashing Setup with RIB